Fig. 117-20 All-purpose digital pressure gauge up to 1600bar

with 2-wire output 4...20mA, also for flush mounting and attachment mounting

For direct pressure indication at the measuring point and simultaneous system controlling (electrical output signal, proportional to the value of the measured pressure)
Good readability of digital indicator, large font size 12.7mm
Extremely wide range of industrial applications for reading ranges from -100/0 mbar to 0/1600 bar
Very high measurement accuracy: <0.3% of the span
For relative pressure measurement, optionally also for absolute pressure measurement
Rugged stainless steel bayonet housing for all-purpose applications in industrial environments
Dust and water jet proof, for use in unprotected outdoor areas (IP65)
Highly corrosion and chemical resistant measurement system made of CrNi steel, for gaseous and low-viscosity non-crystallising measuring media or measuring media not containing solid bodies

Energy supply: 17...30 V (DC)
power input: 1W
Nominal size Accuracy Connection Housing
NS 100 <0.3% of span G 1/2B CrNi steel, 1.4301
Sensor type: <4bar, measuring bridge, piezoresistive; ≥4bar, measuring bridge, thin film strain gauge
Output signal:
- 2-wire connection: 4...20mA
Accuracy: <0.3% of span (linearity+hysteresis+reproducibility)
Scale ranges (negative overpressure): -100/0 mbar ... -1/0 bar
Scale ranges (positive overpressure): 0/100 mbar ... 0/1600 bar
Scale ranges (neg./pos. overpressure):
Measuring medium temperature: -20°C to +80°C
Housing type: Housing with bayonet catch
Housing protection type: IP65 acc. to EN 60528 / IEC 529
Sensing element material: <4bar: CrNi steel:l 1.4435; ≥4 bar: CrNi steel: 1.4568
Connection material: CrNi steel: 1.4571

Nominal size	Accuracy	Connection	Housing
NS 100	<0.3% of span	G 1/2B	CrNi steel, 1.4301