Contact us
Back to overview

Fig. 43 Machine angle thermometer

Symbol image

Fig. 43 Machine angle thermometer

Application and performance features of the machine angle thermometer
  • Wide range of industrial applications for display ranges from -60°C to +200°C, optionally up to +300°C
  • Suitable for aggressive environmental conditions – seawater-resistant and highly resistant to chemicals
  • The glass measuring insert (prismatic glass capillary tube) is mounted in a die-cast aluminum housing to protect it against impact and vibration
  • Can be used for measuring points with mechanical vibrations
  • Non-toxic thermometric liquid for display ranges from -30°C to +200°C
  • Abrasion-resistant and easy-to-read scale lettering, additionally protected by an overlying anodized layer
  • 90° angled temperature sensor
Design standard
Measuring principle Liquid thermometer that indicates temperature changes due to the expansion of a liquid in a capillary tube
Nominal size 110 mm, 150 mm, 200 mm
Display ranges -10/+50°C; -30/+50°C; -60/+40°C; 0/50°C; 0/60°C; 0/100°C; 0/120°C; 0/160°C; 0/200°C
Accuracy class +- 1% of full scale
Load capacity 100 % of the final value for a short time
Temperature sensor Ø10mm, 30 mm, 40 mm, 50 mm, 63 mm, 75 mm, 100 mm, 160 mm
Connection position Rear
Housing material Housing: V-shaped die-cast aluminium housing, gold-coloured anodized
Enclosure protection class IP68 according to EN 60529
Ambient and storage temperature -20°C to +60°C

Nominal size H U1 b T SW
110 110 30-100 30 40-400 27
150 150 40-160 30 40-400 27
200 200 40-160 30 40-400 27

All dimensions in millimeters.

Measuring sensor in CuNiFe alloy, highly resistant to seawater on request
Measuring probe in stainless steel 1.4571, highly resistant to chemicals from 1 pc.
Double division °C and °F from 1 pc.
Extended housing width 36mm from 100 pcs.
Special threads (e.g. NPT, BSP, metric) from 10 pcs.

Other special versions on request.

Thermowell type Material
G1/2 B Copper alloy 2.0321
Union nut for connection to weld-in thermowells Copper alloy 2.0321
Special threads (e.g. NPT, BSP, metric) Copper alloy 2.0321

Other special versions on request.

Please observe the relevant standards and laws, as well as the installation and operating instructions for thermometers.

In particular, we would like to draw your attention to the suitable measuring materials with regard to material resistance and their maximum measuring material temperature.

This specification refers to our current standard with regard to design, dimensions and materials. JAKO Messtechnik GmbH reserves the right to make changes or modifications without prior notice.

PDF-Generator
Accessories
No accessories found for this product
Alternative products
No alternatives found for this product
Are you looking for a special product or do you need an individual offer?

Contact us and we will advise you comprehensively on possible solutions!

Contact us
WordPress Cookie Plugin by Real Cookie Banner