Name: JAKO Fig. 360 Noble gas pressure thermometer | Highest precision since 1949
Brand: Gas pressure thermometer

Fig. 360 Noble gas pressure thermometer

Symbol image

Fig. 360 Noble gas pressure thermometer

Application and performance features of the thermometer

Very wide range of industrial applications from -200°C in cryogenic technology (cryogenics) up to +800°C e.g.: for measuring diesel engine exhaust gases
Very high response speed due to highly compressed gas filling in the measuring system
Maintenance-free and long calibration intervals due to extremely low mechanical wear
Absolutely food and environmentally friendly due to the use of odorless, tasteless and absolutely non-toxic noble gases in the measuring system
Highly corrosion-resistant and robust bayonet housing in stainless steel, suitable for industrial environments
High precision, i.e: Repeat accuracy and low measurement hysteresis
High measuring accuracy: Class 1 according to EN 13190
Can be combined with a variety of thermowell connection types

Type standard	conforms to EN 13190
Measuring principle	Dial thermometer that works according to the principle that the change in pressure of a constant quantity of gas is a measure of the change in temperature
Display ranges	-200°C to +800°C
Accuracy class	1
Nominal sizes	100 mm, 160 mm
Connection position	rear centric
Material	Bayonet housing: Stainless steel 1.4301 Bayonet ring: Stainless steel 1.4301 Viewing window: Instrument glass Pointer: Aluminium, black anodized Dial: Aluminium, white coated, black printed Temperature sensor: Stainless steel 1.4571
Enclosure Protection class	IP65 according to EN 60529 / IEC 529
Adjustment option	on the temperature sensor

Nominal size	D	D1	d1	d	T	b	b1
100	100	99	15	10,7	34	50	30
160	160	159	15	10,7	34	50	30

^{All dimensions in millimeters.}

Customized imprint (text, logo), special scale	from 1 pc.
Min. or max., min. and max. drag indicator, resettable	from 1 pc.
Red brand pointer, adjustable from the outside	from 1 piece
Works certificate 2.1 (EN 10204)	from 1 pc.
(Material) acceptance test certificate 3.1 (EN 10204)	from 1 pc.
Factory calibration incl. calibration certificate	from 1 pc.
Temperature sensor: CrNi steel 1.4571, ø 7mm or 9mm	from 1 pc.
Laminated safety glass	from 1 pc.
Vibration-damped version (Attention: <120°C!)	from 1 pc.
Glycerine, silicone or white oil filling (FDA approved)	from 1 pc.
Excess or intermediate length <50mm step	from 1 pc.

Connection type 01 Screw-in thermowell with sensor (standard)	Stainless steel 1.4571
Type 02 (option)	Stainless steel 1.4571
Type 03 (option)	Stainless steel 1.4571
Type 04 (option)	Stainless steel 1.4571
Type 06 (option)	Stainless steel 1.4571
Type 07 (option)	Stainless steel 1.4571
Type 08 (option)	Stainless steel 1.4571
Type 09 (option)	Stainless steel 1.4571
Type 10 (option)	Stainless steel 1.4571

Please observe the relevant standards and laws, as well as the installation and operating instructions for thermometers.

In particular, we would like to draw your attention to the suitable measuring materials with regard to material resistance and their maximum measuring material temperature.

This specification refers to our current standard with regard to design, dimensions and materials. JAKO Messtechnik GmbH reserves the right to make changes or modifications without prior notice.