| Design standard | JAKO factory standard |
| Installation | for welding in |
| Nominal length | one-piece turned: 45 mm to 200 mm |
| Minimum immersion depth | 40 mm |
| Operating temperature | ≤600 °C |
| Material | Turned in one piece: steel or stainless steel Locking screw: M4 |
| Flow velocity | <1.5 m/s |
| Nominal pressure PN | 40 bar |
| Material resistance | see material resistance list |
| Ambient and storage temperature | -20°C to +60°C |
| Shape | D1 | D2 | B1 | S | B2 | SW | U1 |
| 10 | 13 | 24 | 7,5 | 5 | 15,5 | – | 45/63/100/150/200 |
All dimensions in millimeters.
| Stainless steel 1.4571 | from 1 pc. |
| all nominal lengths | for welding in |
Please note the General information on temperature measuring devices.
The load specifications are based in part on highly simplified assumptions for the mechanical stresses occurring in the protective conduits under idealized operating conditions. For example, pulsating incident flows are not taken into account. The data can therefore only be of an indicative nature for thermowells under real operating conditions. They do not provide complete security against breakage or tearing.
This specification refers to our current standard with regard to design, dimensions and materials. JAKO Messtechnik GmbH reserves the right to make changes or modifications without prior notice.
Contact us and we will advise you comprehensively on possible solutions!
