Name: JAKO Fig. 15 Industrial capsule pressure gauge | Highest precision since 1949
Brand: Capsule pressure gauge

Fig. 15 Industrial capsule pressure gauge

Symbol image

Fig. 15 Industrial capsule pressure gauge

Application and performance features

High-quality and solid measuring device, corrosion and chemical resistant for plant engineering and industrial applications
Bayonet fitting made of stainless steel, pressure connection pin and measuring element made of copper alloy, sight glass made of instrument glass
Adjustment correction via a micro-adjustment screw, adjustable via a corresponding opening in the viewing window
Suitable for outdoor use and aggressive environmental conditions
Pressure measurement of gaseous, dry media that do not attack the copper alloy
Especially for low pressure measuring ranges for measuring spans from 6 mbar to 600 mbar in accordance with EN 837-3
Accuracy class 1.6 according to EN 837-3

Type standard	conforms to EN 837-3
Measuring principle	Elastic measuring elements (capsule spring) that deform under pressure load
Nominal size	63 mm, 100 mm, 160 mm
Display ranges	-600 mbar to 600 mbar
Accuracy class	1,6
Load capacity	Resting compressive load: full scale value, overload 1.3 x full scale value Dynamic load: 30% to 90% of the full scale value, up to 100,000 load cycles
Installation types and position of the pressure connection spigots	Free-standing process connection: -bottom -rear centric
Material	Bayonet fitting: Stainless steel 1.4301 Window: Instrument glass or safety glass Measuring element: Copper alloy Pressure connection pin: Copper alloy 2.0401 Pointer: Aluminium, black anodized Dial: Aluminium, white coated, black printed Sealing material: NBR (Perbunan)
Enclosure protection class	unfilled IP54, filled IP65 according to EN 60529
Medium temperature	<60°C
Ambient and storage temperature	-20°C to +60°C
Suitable media	Gaseous

Nominal size	D	d	b	c	c1	e	e1	h	SW
63
100	101	99	50	82	82	15	28,5	20	22
160	161	159	50	118	82	16	28,5	20	22

^{All dimensions in millimeters.}

Customized imprint (text, logo), special scale	from 1 pc.
Min. or max., min. and max. drag indicator, resettable (from 60 mbar)	from 1 pc.
Red setting pointer in viewing window, adjustable from outside	from 1 pc.
Throttle screw	from 1 pc.
Works certificate 2.1 (EN 10204)	from 1 pc.
(Material) acceptance test certificate 3.1 (EN 10204)	from 1 pc.
Factory calibration	from 1 pc.
Calibration	from 1 pc.
Special threads (e.g. NPT, BSP, metric)	from 10 pcs.
Oil and grease-free design incl. certificate	from 1 pc.
Oxygen or acetylene version, incl. certificate	from 1 pc.
Glycerine, silicone or white oil filling (FDA approved)	from 1 pc.
Increased weather protection (for unfilled devices) IP65 in accordance with EN 60528	from 1 pc.
Increased overload safety	from 1 pc.

^{Other special versions on request.}

Nominal size 63 mm	G1/4 B, copper alloy
Nominal size 100 mm, 160 mm	G1/2 B, copper alloy

^{Other special versions on request.}

Nominal size 100 mm: Minimum measuring span: 10 mbar

Nominal size 160 mm: Minimum measuring span: 6 mbar

Adjustment correction:
-from the lower range value through an opening in the sight glass
-without adjustment correction for devices with liquid damping

Please observe the relevant standards and laws, as well as the installation and operating instructions for pressure gauges.

We would like to draw your attention in particular to the suitable media with regard to material resistance and their maximum media temperature.

This specification refers to our current standard with regard to design, dimensions and materials. JAKO Messtechnik GmbH reserves the right to make changes or modifications without prior notice.