Name: JAKO Fig. 480 Pressure gauge tap with clamping sleeve spigot connection | Highest precision since 1949
Brand: Accessories

Fig. 480 DIN 16262 Pressure gauge stopcock (form A) clamping sleeve spigot connection

Symbol image

Fig. 480 DIN 16262 Pressure gauge stopcock (form A) clamping sleeve spigot connection

Application and performance features of the pressure gauge tap

Shut-off and throttling device with clamps, for installation between pressure gauge and upstream cooling section, e.g: Siphon
Three operating positions can be set with the tap/valve: venting position (pressure gauge is depressurized and vented), measuring or transit position (pressure gauge is under pressure); blow-out position (the medium is discharged into the open)
Pressure tapping side with spigot and pressure gauge connection with clamping sleeve
Suitable for gases, vapors and liquids from -10°C to +50°C
Highly corrosion and chemical resistant in stainless steel design
Maximum operating pressure up to 16 bar

Type standard	DIN 16262 Form A
Shut-off element	Fig. 48 Chick made of copper alloy Fig. 480 Chick made of CrNi steel 1.4571
Sealing	Sealing and lubricating grease
Connection gasket	Pressure gauge Flat gasket
Handle	Plastic
Material	Fig. 48 Housing Copper alloy Fig. 480 CrNi steel 1.4571
P max	16 bar
T max	-10°C to +50°C

	h	l1	SW1
G1/2 B	58	80	27

^{All dimensions in millimeters.}

Special threads (e.g. NPT, BSP, metric)	from 1 pc.
Works certificate 2.1 (EN 10204)	from 1 pc.

^{Other special versions on request.}

Pressure connection	Measuring device connection
G1/2 B, spigot	G1/2 B, clamping sleeve
G1/4 B, spigot	G1/4 B, clamping sleeve

^{Other special versions on request.}

Please observe the relevant standards and laws, as well as the installation and operating instructions for pressure gauges.

In particular, we would like to draw your attention to the suitable media with regard to material resistance and their maximum media temperature.

This specification refers to our current standard with regard to design, dimensions and materials. JAKO Messtechnik GmbH reserves the right to make changes or modifications without prior notice.