Name: JAKO Fig. 461 Pressure gauge tap with rotatable socket spigot connection | Highest precision since 1949
Brand: Accessories

Fig. 461 Pressure gauge tap (rotatable) socket spigot connection

Symbol image

Fig. 461 Pressure gauge tap (rotatable) socket spigot connection

Application and performance features of the pressure gauge tap

Shut-off and throttling device with plug, for installation between pressure gauge and upstream cooling section, e.g: Siphon
The tap/plug can be used to set 3 operating positions: venting position (pressure gauge is depressurized and vented), measuring or transit position (pressure gauge is pressurized); blow-out position (the medium is discharged into the open)
Pressure tapping side with spigot G1/2 B and pressure gauge connection with rotatable socket G1/2 B;
Suitable for gases, vapors and liquids from -10°C to +50°C
Suitable for brass-compatible media
Maximum operating pressure up to 16 bar

Design standard	based on DIN 16261 Form A
Shut-off element	Brass chick
Sealing	Sealing and lubricating grease
Connection gasket	Pressure gauge Flat gasket
Handle	Plastic
Material	Housing Copper alloy
P max	16 bar
T max	-10°C to +50°C

	l	h	SW
G1/2 B	95	54	27

^{All dimensions in millimeters.}

Special threads (e.g. NPT, BSP, metric)	on request
Works certificate 2.1 (EN 10204)	from 1 pc.

^{Other special versions on request.}

Pressure connection	Measuring device connection
G1/2 B, spigot	G1/2 B, swivel socket

^{Other special versions on request.}

Please observe the relevant standards and laws, as well as the installation and operating instructions for pressure gauges.

In particular, we would like to draw your attention to the suitable media with regard to material resistance and their maximum media temperature.

This specification refers to our current standard with regard to design, dimensions and materials. JAKO Messtechnik GmbH reserves the right to make changes or modifications without prior notice.