Type standard | DIN 16261 Form B |
Shut-off element | Fig. 46 Brass plug Fig. 460 Plug made of CrNi steel 1.4571 |
Sealing | Sealing and lubricating grease |
Connection gasket | Pressure gauge Flat gasket |
Handle | Plastic |
Material | Fig. 46 Housing Copper alloyFig. 460 CrNi steel 1.4571 |
P max | 16 bar |
T max | -10°C to +50°C |
h1 | l1 | SW1 | |
G1/4 B | 54 | 61 | 22 |
G1/2 B | 67 | 80 | 27 |
All dimensions in millimeters.
Special threads (e.g. NPT, BSP, metric) | from 1 pc. |
Works certificate 2.1 (EN 10204) | from 1 pc. |
Other special versions on request.
Pressure connection | Measuring device connection |
G1/2 B, spigot | G1/2 B, fixed socket |
G1/4 B, spigot | G1/4 B, fixed socket |
Other special versions on request.
Please observe the relevant standards and laws, as well as the installation and operating instructions for pressure gauges.
In particular, we would like to draw your attention to the suitable media with regard to material resistance and their maximum media temperature.
This specification refers to our current standard with regard to design, dimensions and materials. JAKO Messtechnik GmbH reserves the right to make changes or modifications without prior notice.
Contact us and we will advise you comprehensively on possible solutions!