Application standards

Application- and use-related norms & standards

JAKO products must be adjusted to the respective measurement environment with utmost care. Designers, constructors, operators and users are responsible for this applications planning as well as the workmanlike installation, assembly and use. The following are some application standards that have repeatedly proven to be of value.

IMPORTANT: JAKO is usually not informed about the specific application situation. More often than not, there are several stations in the supply chain between the user and JAKO.  Therefore, it is of particular importance to us to point out your planning and implementation responsibility.

All international, European or national standards, as amended, are available at the Austrian Standards Institute
www.as-institute.at

 

Standard Type Title and content Release

European standards - General

97/23/EG   European Pressure Equipment Directive    
94/9/EG   ATEX 1994
ATEX
Leitlinien
  Guidelines on the application of the Directive 94/9/EC
of the European Parliament and Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres. (3rd edition, June 2009) 2009)
2009
ÖVE/ÖNORM
EN 60529
 

Degrees of protection provided by enclosures

(IP code) (IEC 60529:1989+A1:1999)
 

Oil and gas industry, petrochemical industry

ÖNORM EN
ISO 15156-1

 

NACE MR0175

S

Petroleum and natural gas industries – Materials for use in H2S-containing environments in oil and gas production - Part 1:

General principles for selection of cracking-resistant materials
(ISO 15156-1:2009)

2010

ÖNORM EN
ISO 15156-2

 

NACE MR0175

S

Petroleum and natural gas industries – Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels and the use of cast irons (ISO 15162-2:2009)

2010

ÖNORM EN
ISO 15156-3

 

NACE MR0175

S

Petroleum and natural gas industries – Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2009)

2010

Sanitary, heating, ventilation, air conditioning and refrigerating systems

ÖNOMRM
H 5195-1
 

Heat transfer media for building services systems – Part 1:
Prevention of damage by corrosion and scale formation in closed hot water heating systems

2010
ÖNOMRM
H 5195-2
 

Prevention of freezing damage in heating systems
and other systems with heat transfer media

2005
ÖNOMRM
H 5195-3
 

Closed cold and cooling water systems
for air conditioning systems and industrial use

2007
VDI 2035
 
 

Prevention of damage in water heating installations
Scale formation in domestic hot water supply installations and water heating installations – including part 1 – Corrigendum concerning Guideline VDI 2035 Part 1:2005-12

2006
VDI 2035
Blatt 2
 

Prevention of damage in water heating installations
Water-side corrosion

2009
ÖNORM
EN 12502-1
 

Protection of metallic materials against corrosion  -

Guidance on the assessment of corrosion likelihood

in water distribution and storage systems – Part 1: General

2005
ÖNORM
EN 12502-2
  Protection of metallic materials against corrosion – Corrosion likelihood in water distribution systems – Part 2
Overview of the influencing factors for copper and copper alloys
2005
ÖNORM
EN 12502-3
 

Protection of metallic materials against corrosion – Corrosion likelihood in water distribution systems – Part
Influencing factors for hot dip galvanised ferrous materials

2005
ÖNORM
EN 12502-4
 

Protection of metallic materials against corrosion – Corrosion likelihood in water distribution systems – Part 4

Influencing factors for stainless steels

2005
ÖNORM
EN 12502-5
 

Protection of metallic materials against corrosion – Corrosion likelihood in water distribution systems – Part 5
Influencing factors for cast iron, unalloyed and low alloyed steels

2005
ÖNORM
EN 15001-1
 

Gas infrastructure – Gas installation pipework with an operating pressure greater than 0.5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing

2010

Welding applications

EN ISO 5171
replaces

EN 562  (2003)

 

Gas welding equipment – Pressure gauges

fused in welding, cutting and allied processes (ISO 5171:2009)

2009

Hygiene-compatible applications in the pharma and food industry

DIN 11864-1  

Fittings of stainless steel

for the aseptic, chemical and pharma industry – Part 1:

Aseptic screwed pipe connection, standard type

2008
DIN 11864-2  

Fittings of stainless steel

for the aseptic, chemical and pharma industry – Part 2:

Aseptic flanged pipe connection, standard type

2008
DIN 11864-3  

Fittings of stainless steel

for the aseptic, chemical and pharma industry – Part 3:

Aseptic clamp pipe connection, standard type

2008
DIN 11851-1  

Stainless steel fittings for the food and chemical industry
– screw pipe connections for expanding and welding

“Milk pipe screw connections needing to be disassembled for cleaning“

2010
ISO 2852  

Stainless steel clamp pipe couplings for the food industry

Clamp-connection

1993
DIN 32676  

Food, chemical and pharma industry fittings – clamp connections for stainless steel pipes – design for butt welding

2009